IACM-IOLM8A-ECT/PN Multiple IO LINK Communication 8 Port Series EtherCat Protocol

IACM-IOLM8A-ECT/PN,IO LINK Main Station,8-Port Series

Product characteristics

4-port series IO LINK master device supports multiple fieldbus protocols,

These include Profinet, EtherCat, and EtherNet-IP protocols

Supports up to 4 IO-Link slave devices (including RFID and DIO slave devices)

Supports communication and power cascade between multiple master stations

Comply with IO-Link technology V1.1 specification

model	IACM-IOLM8A-ECT	IACM-IOLM8A-PN	IACM-IOLM8A-EIP	IACM-IOLM4A4B-ECT	IACM-IOLM4A4B-PN	IACM-IOLM4A4B-EIP
communication protocol
product description	IO-LINK master module			IO-LINK master module
	8 Class A port			4 Class A port
	IP67 protection class			4 Class B port
				IP67 protection class
I/O connection mode	M12, 5pin hole holder, A code
I0-Link master parameters
Number of master stations	The maximum configurable 8 ports
Master connection mode	M12, 5-core, A-code, female head
lO-link version	V1.1.2
Communication rate	COM1:4.8KBps
	COM2;38.4KBps
	COM3:230.4KBps
The port voltage is L+	type.24VDC(via US)
The port current is L+	2A(via US)
ClassB auxiliary voltage	-			type.24VDC(via UA)
ClassB auxiliary voltage	-			2A(via UA)
Class A	8口,X1.….X8			4口,X1…X4
Class B	-			4口,X5.….X8
Master-slave communication distance	≤20 meters
Master-master communication distance	≤100meters
Digital input and output parameters
Number of inputs	8 way, adaptive			4 way, adaptive
Input port location	X1…X8			X1…X4
Polarity of input	PNP
Signal "0" voltage	-0.3…5VDC
Signal "1" voltage	12…30VDC
incoming current	type.5mA(via US)
Number of outputs	8 way, adaptive			4 way, adaptive
Output port location	X1…X8			X1…X4
Polarity of input	PNP
current output	Single channel 2A(via UA)
Port protection	Power short circuit protection, power supply port overload protection
Module indicator light
EtherCat Protocol		ProfiNet protocol		EtherNet/IP protocol
PWR	Green: the module power supply is normal
	Red: module power reverse connection
I/O	Green: the channel signal is normal
	Red: port power supply short circuit
LINK	Green: The link is working
	Huang Shan: The link is normal. The data communication is normal
	Out: No link was established
RUN	Green: OP status	SF	Red: module failure	MS	Green: The module is in normal condition
	Green slow flash: SAFEOP status				Green flash: Module is not configured
	Green flash: Pre-OP state	BF	Red: Internal error		Red: module failure
	Extinguished: Init state		Red flash: device name /	NS	Green: network status is normal
ERR	Red flash: Communication error occurred		IP address		Green flash: Communication is not established
	Extinguished: The state of the module is normal		Module group status error		Red flash: communication interruption
IO-LINK	Green: port operation (running) state
	Green Flash: Port connection process or wrong device
	Green slow flash: The port is in a pre-operational state
	Green off: The port is closed
I/O port pin definition
ports	Definition of stitch			Address distribution
M12
A-code mother end
Data port pin definition
M12	connection type		2×M12 D-code; 4-core hole holder;
D-code	physical layer		Ethernet
female connector	transmission speed		10/100 Mbps, full duplex
	character		Protocol conformance
	warning function		Diagnostic alarm, process alarm
	minimum cycle time		1ms
	Communication port tightening torque		M12:0.5Nm
underlying parameter
	shell material			aluminium alloy
	shell color			Metallic silver primary color
	level of protection			IP67, epoxy full potting
	boundary dimension			205mm×60mm×34.4mm
	weight			515g
	Operating Temperature Range			-25℃…70℃
	Storage/transport temperature			-40℃…85℃
	operation humidity			5%…95%
	Store/transport humidity			5%…95%
	Operating atmospheric pressure			80KPa…106KPa
	Store/transport atmospheric pressure			80KPa…106KPa
	IVO mouth tightening torque			M12:0.5Nm
	application environment			In accordance with EN-61131
	vibration measurement			Comply with IEC60068-2
	impact test			Comply with IEC60068-27
	Free drop test			Comply with IEC60068-32
	Electromagnetic compatibility (EMC)			Comply with IEC61000-4-2,-3,-4
	authentication			CE,RoHS
	Mounting hole specification			∅4.5mmx1；∅5.5mmx1
Auxiliary power port pin definition
auxiliary power supply port M12 L-codeFemale & male end Definition of stitch	Power connection mode		M12, 5-core, L-code, male/female head
	System supply voltage us		18…30 VDC(type.24VDC)
	Auxiliary power supply voltage ua		18…30 VDC(type.24VDC)
	Total current Is		12A
	Total current la		12A
	Static operating current Ic		≤150mA
	Power reverse connection protection		have
	Power port tightening torque		M12:0.5Nm